EMU Lighting

Full Version: Programs doesn't save
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello,

I'm using this software with dmxis interface and MacBook Pro. I tried to make two simple colour changes and save those in different programs. Any changes hasn't been saved. Am I doing something wrong or is there some bug in software. Earlier I have been using DMXis software with success.
Hello,

When you say that the changes aren't saving do you mean that when you change back between your programs they are back to 0 or are they are just staying the same and not remembering their values?
On the main screen in the programs widget, there is a blue save icon that will force the programs to save. Gives this a shot and see if it helps.
(07-12-2020, 03:39 PM)MatthewC_ENTTEC Wrote: [ -> ]Hello,

When you say that the changes aren't saving do you mean that when you change back between your programs they are back to 0 or are they are just staying the same and not remembering their values?
On the main screen in the programs widget, there is a blue save icon that will force the programs to save. Gives this a shot and see if it helps.

Hello,

I tried that and I can't save anything to new or current program. "Save" button ask's me about to overwrite, but nothing is saved in program. 

This is how I do it. I'm changing values of the faders and save that in program. Then I do my changes with faders and save that to another "program". When I change back to any program, faders and values stays in the position that I leaved them. So nothing is saved that I've done.

I don't have any light fixtures connected to DMXIS, but that shouldn't be a problem. I have all my fixtures set up in EMU. None of these changes of any fixture won't be saved in to program. By that I mean that the issue isn't in fixture preset.
(08-12-2020, 05:31 AM)Drumfreak Wrote: [ -> ]
(07-12-2020, 03:39 PM)MatthewC_ENTTEC Wrote: [ -> ]Hello,

When you say that the changes aren't saving do you mean that when you change back between your programs they are back to 0 or are they are just staying the same and not remembering their values?
On the main screen in the programs widget, there is a blue save icon that will force the programs to save. Gives this a shot and see if it helps.

Hello,

I tried that and I can't save anything to new or current program. "Save" button ask's me about to overwrite, but nothing is saved in program. 

This is how I do it. I'm changing values of the faders and save that in program. Then I do my changes with faders and save that to another "program". When I change back to any program, faders and values stays in the position that I leaved them. So nothing is saved that I've done.



I don't have any light fixtures connected to DMXIS, but that shouldn't be a problem. I have all my fixtures set up in EMU. None of these changes of any fixture won't be saved in to program. By that I mean that the issue isn't in fixture preset.

Problem solved. I had used midi to get physical faders. It seems that when you insert midi control to faders etc it overrides programming. I took all midi commands off and everything works fine. 

Is there going to be a change to that midi function? I would like to send midi commands from surface and still be able to write programs like I've done with DMXIS.