EMU Lighting
Programs doesn't save - Printable Version

+- EMU Lighting (https://www.emulighting.com)
+-- Forum: EMU Software (https://www.emulighting.com/forum-1.html)
+--- Forum: General Topics (https://www.emulighting.com/forum-2.html)
+--- Thread: Programs doesn't save (/thread-6.html)



Programs doesn't save - Drumfreak - 06-12-2020

Hello,

I'm using this software with dmxis interface and MacBook Pro. I tried to make two simple colour changes and save those in different programs. Any changes hasn't been saved. Am I doing something wrong or is there some bug in software. Earlier I have been using DMXis software with success.


RE: Programs doesn't save - MatthewC_ENTTEC - 07-12-2020

Hello,

When you say that the changes aren't saving do you mean that when you change back between your programs they are back to 0 or are they are just staying the same and not remembering their values?
On the main screen in the programs widget, there is a blue save icon that will force the programs to save. Gives this a shot and see if it helps.


RE: Programs doesn't save - Drumfreak - 08-12-2020

(07-12-2020, 03:39 PM)MatthewC_ENTTEC Wrote: Hello,

When you say that the changes aren't saving do you mean that when you change back between your programs they are back to 0 or are they are just staying the same and not remembering their values?
On the main screen in the programs widget, there is a blue save icon that will force the programs to save. Gives this a shot and see if it helps.

Hello,

I tried that and I can't save anything to new or current program. "Save" button ask's me about to overwrite, but nothing is saved in program. 

This is how I do it. I'm changing values of the faders and save that in program. Then I do my changes with faders and save that to another "program". When I change back to any program, faders and values stays in the position that I leaved them. So nothing is saved that I've done.

I don't have any light fixtures connected to DMXIS, but that shouldn't be a problem. I have all my fixtures set up in EMU. None of these changes of any fixture won't be saved in to program. By that I mean that the issue isn't in fixture preset.


RE: Programs doesn't save - Drumfreak - 08-12-2020

(08-12-2020, 05:31 AM)Drumfreak Wrote:
(07-12-2020, 03:39 PM)MatthewC_ENTTEC Wrote: Hello,

When you say that the changes aren't saving do you mean that when you change back between your programs they are back to 0 or are they are just staying the same and not remembering their values?
On the main screen in the programs widget, there is a blue save icon that will force the programs to save. Gives this a shot and see if it helps.

Hello,

I tried that and I can't save anything to new or current program. "Save" button ask's me about to overwrite, but nothing is saved in program. 

This is how I do it. I'm changing values of the faders and save that in program. Then I do my changes with faders and save that to another "program". When I change back to any program, faders and values stays in the position that I leaved them. So nothing is saved that I've done.



I don't have any light fixtures connected to DMXIS, but that shouldn't be a problem. I have all my fixtures set up in EMU. None of these changes of any fixture won't be saved in to program. By that I mean that the issue isn't in fixture preset.

Problem solved. I had used midi to get physical faders. It seems that when you insert midi control to faders etc it overrides programming. I took all midi commands off and everything works fine. 

Is there going to be a change to that midi function? I would like to send midi commands from surface and still be able to write programs like I've done with DMXIS.